List of Messages |
CAUSE: The scanclk port of the specified enhanced PLL is disconnected or is driven by GND or VCC . If you use the scandata port or the scandataout port for the serial scan chain loading interface, the scanclk port of the enhanced PLL must be driven by a signal. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the MegaWizard Plug-In Manager .
ACTION: Modify the design so that the scanclk port is driven by a signal. To avoid receiving this message in the future, Altera recommends using the MegaWizard Plug-In Manager.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.