List of Messages |
CAUSE: You assigned the specified enable input pins (ena) in the design; however, the current device can use only one enable input design.
ACTION: Modify the design so that one input pin drives the ena port of the enhanced or fast PLL or so that only one input pin drives the ena port of a different enhanced or fast PLL.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.