List of Messages |
CAUSE: The SYNC_MODE, ASYNC_MODE, POWER_UP, and USE_PHASECTRL_CLOCK parameters of the specified output phase alignment primitive are assigned values that are not allowed when the OPERATION_MODE parameter is set to RTENA or EXTENDED_RRENA.
ACTION: Check the design and make sure that the SYNC_MODE and ASYNC_MODE parameters are set to NONE, the POWER_UP parameter is set to LOW, and the USE_PHASECTRL_CLOCK parameter is set to TRUE when the OPERATION_MODE parameter is set to RTENA or EXTENDED_RTENA.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.