List of Messages |
CAUSE: The dataout output of the specified output phase alignment primitive has an illegal connection.
ACTION: Check the design and make sure that the specified dataout output is driving the oe input of an I/O output buffer. You can also connect the dataout output to the oe input indirectly through up to two delay chain primitives. In this configuration, the dataout output of the specified output phase alignment primitive would drive the datain input of a delay chain primitive and the dataout output of the same delay chain primitive would drive the oe input of an I/O output buffer. Alternatively, you can change the value of the OPERATION_MODE parameter.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.