List of Messages |
CAUSE: The enaphasetransferreg input of the specified input phase enable primitive is not connected while the ADD_PHASE_TRANSFER_REG parameter is set to dynamic.
ACTION: Check the design and make sure that the specified enaphasetransferreg input is connected. Alternatively, you can change the value of the ADD_PHASE_TRANSFER_REG parameter.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.