List of Messages |
CAUSE: enaphasetransferreg input of the specified DQS enable control primitive is not connected while ADD_PHASE_TRANSFER_REG parameter is set to dynamic.
ACTION: Connect the enaphasetransferreg input of the specified DQS enable control primitive or change the ADD_PHASE_TRANSFER_REG parameter to anything other than dynamic".
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.