List of Messages |
CAUSE: The specified offsetctrlin input of the specified DQS delay chain can be driven only by the corresponding offsetctrlout outputs of a DLL offset control. If the DQS_OFFSETCTRL_ENABLE parameter is set to FALSE, then the offsetctrlin input can also be disconnected.
ACTION: Change the design so that the offsetctrlin input is driven by the corresponding offsetctrlout outputs of a DLL offset control primitive, or if you want to disconnect the offsetctrlin input, set the DQS_OFFSETCTRL_ENABLE to FALSE.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.