List of Messages |
CAUSE: If an MLAB cell's mixed port read during write setting is New Data or Old Data, then the MLAB cell must be driven by registers at its Port A Address and Port B Address ports. Its Port B Dataout port must be registered. In addition, these registers must be driven by the same clock as the MLAB cell itself.
ACTION: If you are using an EDA tool, please contact the technical support for the EDA tool regarding this message. For further assistance contact Altera Technical Support by creating a Service Request at www.altera.com/mysupport.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.