List of Messages |
CAUSE: The specified DSP block multiplier WYSIWYG primitive has accumulate port connected or connected to constant VCC, where accumulate feature only support for sp_mult_acc operation mode.
ACTION: Left the accumulate port un-connected if accumulate feature is not used or change the operation_mode to sp_mult_acc.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.