List of Messages |
CAUSE: The specified LCELL atom is in synchronous mode (that is, either the sload port is connected, or the sclr port is connected), but it does not use the clk port. The clk port must be used in synchronous mode. Either the clk port must be connected, or the sload port and the sclr port must be disconnected.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance contact Altera Technical Support by creating a Service Request at www.altera.com/mysupport.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.