List of Messages |
CAUSE: The specified atom is in extended LUT mode, but does not use any of the LUT input ports. When the specified atom is in extended LUT mode, all of the LUT input ports must be used, or the EXTENDED_LUT parameter must be set to OFF. The LUT input ports include the dataa, datab, datac, datad, datae, dataf, and datag ports.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance contact Altera Technical Support by creating a Service Request at www.altera.com/mysupport.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.