List of Messages |
CAUSE: When the operation_mode parameter of the specified PLL is set to one of: normal, source_synchronous, no_compensation, or zero_delay_buffer, the fbin input of the specified PLL must be connected to the fbout output of the same PLL.
ACTION: Make sure the fbin input and the fbout output of the specified PLL are connected properly.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.