List of Messages |
CAUSE: You turned on both the Enable Bus-Hold Circuitry logic option and the Weak Pull-Up Resistor logic option for the specified pin. However, you can enable only one of these assignments for the pin.
ACTION: Modify the settings so that you enable only one of the logic options for the pin.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.