List of Messages |
CAUSE: You downloaded a design containing a SignalTap instance into a device using a version of the Quartus Prime software and then ran the related SignalTap II File (.stp) in the SignalTap II Logic Analyzer using a different version of the Quartus Prime software. However, when you ran the SignalTap II Logic Analyzer, you upgraded the version of the STP File. As a result, the version number of the STP File is different from the version number of the SignalTap instance. The SignalTap II Logic Analyzer cannot acquire data if the STP File and the SignalTap instance have different version numbers.
ACTION: Make sure the SignalTap instance and the STP File are the same version. Otherwise, recompile the design, download the design into the device, and run the SignalTap II Logic Analyzer again. To avoid receiving this message in the future, do not upgrade the STP File instance version when prompted to do so when opening the STP File in the Quartus Prime software, or save a copy of the original file that you can use to restore the original STP File.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.