List of Messages |
CAUSE: SignalTap II calculated CRC values of the data shifted out of the device once in the device at the source and once in the software as received by computer. The two CRC values don't match. The bits are corrupted during communication. The most likely cause is the signal integrity issue with JTAG chain.
ACTION: Data showing in the waveform contain errors. Use with caution.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.