List of Messages |
CAUSE: The specified phase-locked loop (PLL) uses the specified test-only parameter, but is not in test mode. The test-only parameter is reserved for internal testing purposes, and must be used only when the PLL is in test mode.
ACTION: Remove the test-only parameter for the PLL.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.