List of Messages |
CAUSE: The specified PLL has the PLL_TYPE parameter set to CDR, but has the OPERATION_MODE parameter set to a value other than NORMAL. The OPERATION_MODE parameter must be set to NORMAL if the PLL_TYPE parameter is set to CDR. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the MegaWizard Plug-In Manager .
ACTION: Change the OPERATION_MODE parameter to NORMAL, or change the PLL_TYPE parameter to a value other than CDR. To avoid receiving this message in the future, Altera recommends using the MegaWizard Plug-In Manager to specify legal parameter values for megafunctions.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.