List of Messages |
CAUSE: You specified a value for the PLL_TYPE parameter in the specified PLL, but the value is not supported. The specified PLL has the specified unsupported value for the PLL_TYPE parameter. Supported parameter values are ENHANCED or AUTO for EXTERNAL_FEEDBACK mode or ZERO_DELAY_BUFFER mode; and ENHANCED, FAST, or AUTO for other modes. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the MegaWizard Plug-In Manager .
ACTION: Locate the source of the message to determine which megafunction parameter is causing the error and specify a legal parameter value. To avoid receiving this message in the future, Altera recommends using the MegaWizard Plug-In Manager command to specify legal parameter values for megafunctions.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.