List of Messages |
CAUSE: You specified the LPM_PIPELINE parameter or the clock port of the megafunction. When the LPM_PIPELINE parameter has a value greater than 0, you must use the clock port, or when you use the clock port, the LPM_PIPELINE parameter must have a value greater than 0.
ACTION: If the LPM_PIPELINE parameter has a value greater than 0, use the clock port. If the clock port is specified, make sure the LPM_PIPELINE parameter has a value greater than 0.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.