List of Messages |
CAUSE: You specified a value for the WIDTH_BYTEENA parameter of the altsyncram megafunction and used the byteena port; however, the byteena port can only be used if the WIDTH_BYTEENA parameter value is greater than 1. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the MegaWizard Plug-In Manager .
ACTION: Modify the design and disconnect the byteena port, or specify a WIDTH_BYTEENA parameter value that is greater than 1. To avoid receiving this message in the future, Altera recommends using the MegaWizard Plug-In Manager.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.