List of Messages |
CAUSE: You specified a clear port for the specified port of the altsyncram megafunction and set the RAM_BLOCK_TYPE parameter with the specified value; however, the clear port cannot be used with an M512 block. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the MegaWizard Plug-In Manager .
ACTION: Modify the design and use a different memory block type, or do not use a clear port with an M512 block. To avoid receiving this message in the future, Altera recommends using the MegaWizard Plug-In Manager.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.