List of Messages |
CAUSE: You specified the RAM_BLOCK_TYPE parameter of the altsyncram megafunction with the M-RAM value; however, the OPERATION_MODE parameter value set to ROM cannot be used with the M-RAM block. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the MegaWizard Plug-In Manager .
ACTION: Modify the design and use a different RAM_BLOCK_TYPE parameter value, or set the OPERATION_MODE parameter value to another value. To avoid receiving this message in the future, Altera recommends using the MegaWizard Plug-In Manager. Use a different RAM_BLOCK_TYPE or change the mode.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.