List of Messages |
CAUSE: You specified disabled and enabled clock enables in the specified registers and on different sides of the RAM block of the altsyncram megafunction, but you cannot have disabled and enabled clock enables that use the same clock on different sides of the RAM block. This warning usually occurs when you instantiate a megafunction directly in a text file rather than using the MegaWizard Plug-In Manager .
ACTION: Modify the design to use either enabled or disabled clock enables on both sides of the RAM block, or use different clocks for the clock enables. To avoid receiving this message in the future, Altera recommends using the MegaWizard Plug-In Manager.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.