List of Messages |
CAUSE: Port A inputs, Port B inputs and Port B outputs share the same clock, so they should use the same clock enable enable/disable setting.
ACTION: Modify the design to use either enabled or disabled clock enables on A inputs, B inputs and B outputs of the RAM block, or use different clocks for the clock enables. To avoid receiving this message in the future, Altera recommends using the MegaWizard Plug-In Manager.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.