List of Messages |
CAUSE: The WIDTHAD is not set correctly . It must be the value of ceil(log2(WIDTH)) if WIDTH is greater than or equal to WIDTH, or 1 when 2 is equal to 1.
ACTION: Change the value of the WIDTHAD parameter to ceil(log2(WIDTH)).
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.