List of Messages |
CAUSE: In the altmult_add megafunction, you used the specified setting for the NUMBER_OF_MULTIPLIERS parameter. However, the altmult_add megafunction cannot use the scanouta or scanoutb ports when the value of the NUMBER_OF_MULTIPLIERS parameter is set to 3.
ACTION: Change the value of NUMBER_OF_MULTIPLIERS parameter to a value other than 3 , or do not use the scanouta or scanoutb ports.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.