List of Messages |
CAUSE: You tried to use different clocks for data and control signals in the same register bank of the altmult_add megafunction with the specified device family. However, data and control signals in the same register bank should share the same clock and/or clear for the specified device family in the same DSP block slice. This warning usually occurs when you instantiate a megafunction directly in a text file rather than using the MegaWizard Plug-In Manager .
ACTION: If you want to use the specified feature in a DSP block, change the device family. If you want to use the specified device family, use a unified clock. To avoid receiving this message in the future, Altera recommends using the MegaWizard Plug-In Manager.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.