List of Messages |
CAUSE: You tried to use different aclr for data and control signals in the same register bank of the altmult_add megafunction with the specified device family. However, data and control signals in the same register bank should share the same clock/clear for the specified device family in the same DSP block slice. This warning usually occurs when you instantiate a megafunction directly in a text file rather than using the MegaWizard Plug-In Manager .
ACTION: If you want to use the specified feature in the DSP block, change the device family. If you want to use the specified device family, use unified aclr. To avoid receiving this message in the future, Altera recommends using the MegaWizard Plug-In Manager.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.