List of Messages |
CAUSE: You tried to use different clock and/or clear for data and control signals in the same register bank of the MegaWizard Plug-In Manager .
ACTION: If you want to use the specified feature in dsp block, change the device family. If you want to use the specified device family, use unified clock and/or clear. To avoid receiving this message in the future, Altera recommends using the MegaWizard Plug-In Manager.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.