List of Messages |
CAUSE: You did not connect the add_sub input port while the value of DIRECTION parameter of the altfp_add_sub megafunction is VARIABLE. The value of the DIRECTION parameter must be set to a either ADD or SUB if the add_sub port is not connected. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the MegaWizard Plug-In Manager .
ACTION: Change the value of the DIRECTION parameter to ADD or SUB. Otherwise, connect the add_sub input port.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.