List of Messages |
CAUSE: The clock0 port of the altera_syncram megafunction is not connected; however, the clock0 port must always connect because the altera_syncram megafunction is a synchronous RAM megafunction. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the IP Parameter Editor.
ACTION: Modify the design and connect the clock0 port of the altera_syncram megafunction. To avoid receiving this message in the future, Altera recommends using the IP Parameter Editor.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.