List of Messages |
CAUSE: You did not specify the specified port of the altera_syncram megafunction; however, when you use the current set of parameters, the specified port must be connected. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the IP Parameter Editor.
ACTION: Modify the design and connect specified port of the altera_syncram megafunction, or change the parameters so that they do not require the specified port. To avoid receiving this message in the future, Altera recommends using the IP Parameter Editor.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.