List of Messages |
CAUSE: You specified width values for port A and port B of the altera_syncram megafunction; however, the port A and port B width values cannot be used with the RAM_BLOCK_TYPE parameter set to value AUTO and the current set of parameters. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the IP Parameter Editor.
ACTION: Modify the design and change the current set of parameters so that they can be used with one of the three memory block types. To avoid receiving this message in the future, Altera recommends using the IP Parameter Editor.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.