List of Messages |
CAUSE: You connected the clocken3 port of the altera_syncram megafunction; however, the clocken3 port can only be used when the clock1 port is connected. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the IP Parameter Editor.
ACTION: Modify the design and connect clock1 port of the altera_syncram megafunction, or disconnect the clocken1 port. To avoid receiving this message in the future, Altera recommends using the IP Parameter Editor.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.