To use the Quartus® Prime Standard Edition software with the Mentor Graphics Tau software, you must install the Quartus® Prime Standard Edition software and establish an environment that facilitates processing designs. The
Quartus® Prime Standard Edition/Mentor Graphics Tau interface is installed automatically when you install the Quartus® Prime Standard Edition software.
Note: The Quartus® Prime Standard Edition Software Release Notes are available on the Altera website and provide up-to-date information on which versions of Mentor Graphics software applications the current version
of the Quartus® Prime Standard Edition software supports. The Quartus® Prime Standard Edition readme.txt file provides information on installation and operating requirements. You should read the Release Notes and
readme.txt before installing the Quartus® Prime Standard Edition software. After installation, you can open the Release Notes and readme.txt file from the Quartus® Prime Standard Edition
Help menu.
To set up your working environment for the Quartus® Prime Standard Edition/Tau software interface, add the following environment variables to your .cshrc file:
setenv QUADHOME <Tau system directory>/<Tau software version number>
setenv LM_LICENSE_FILE<Tau license file path>:$LM_LICENSE_FILE
set path=($TAUHOME/bin $path)
Note: The information presented here assumes that you are using the C shell and that your Quartus® Prime Standard Edition system directory is /usr/quartus on a Linux workstation. If not, you
must use the appropriate syntax and procedures to set environment variables for your shell.
To source your .cshrc file, at the command prompt on a Linux workstation, type:source .cshrc.