You open this dialog box by double-clicking
Report False Paths in the
Tasks pane in the TimeQuest
Timing Analyzer.
Allows you to configure and display a customized report that
details the results of setup, hold, recovery, and removal checks as
defined by timing constraints and exceptions.
Note: You can click the
Pushpin button
to keep the
Report False
Path dialog box open after you generate a report. You can use this feature to fine tune your report settings or quickly create additional reports. You can click
Close to close the dialog box at any time.
The Command Info
tab of the resulting report displays the Tcl commands used to
generate the report. The Summary
of Paths tab displays the slack, from and to nodes, and the
launch and latch clocks for every timing path that you specified in
the Report False Path
dialog box. For a timing path, you can view the following
information in the tabs of separate panes below the Command Info and Summary of Paths tabs:
- The Path Summary tab
displays information on launch and latch clocks, data arrival and
required times, and slack.
- The Statistics tab
displays data on the setup relationship, clock skew, data delay,
logic level count, and physical delays.
- The Data Path tab
displays information on arrival and required paths.
- The Waveform tab
displays data on clock relationships, arrival and required paths,
and slack in a graphical waveform format.
Note: As the timing path information appears in two panes, you can view the information in one tab in the first pane, and that of another tab in the second pane.