|
|
|
|
|
|
Read SDC File Command |
|
|
You access this command by double-clicking Read SDC File in the Tasks pane in the TimeQuest Timing Analyzer. |
Reads existing Synopsys Design Constraints Files (.sdc)— with all current constraints and exceptions— that are specified in user-defined order in the Quartus II Settings File (.qsf). If a Synopsys Design Constraints File is not specified in the Quartus II Settings File, the TimeQuest analyzer reads a default Synopsys Design Constraints File named <revision>.sdc. This command also produces the SDC File List report, which lists all Synopsys Design Constraints Files in the current design.
|
|
Note: If you access the Read SDC File command from the Constraints menu in the TimeQuest analyzer, you must select an Synopsys Design Constraints File from your local disk. |
|
Settings: <file name> |
Copyright© 2005-2014 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.
