Quartus

Verification failed for device number <number>

(ID: 209027)


CAUSE:

You turned on the Verify programming option for programming the specified device. However, the Programmer cannot verify the specified device. This message can occur due one of the following two reasons:

  • If this message appears during device verification, the device may not contain the same data as the programming file.

  • If this message appears during device programming, the device may have a hardware problem.

ACTION: If the error occurs during device verification, select a different device. If the error occurs during device programming, try erasing and reprogramming the device. If the problem persists, contact Altera Applications for assistance.

See also:

Adding or Replacing a Device in a Chain Description File
Image of Programmer
Overview: Working with Chain Description Files
Programming a Single Device or Multiple Devices in JTAG or Passive Serial Mode
Altera Programming Hardware Installation Guide