TimeQuest

Create Timing Netlist Dialog Box (TimeQuest Timing Analyzer)

 


You open this dialog box by clicking Create Timing Netlist on the Netlist menu in the TimeQuest Timing Analyzer.

 

Allows you to configure and load the timing netlist that the TimeQuest analyzer uses to calculate path delay data. You must create the timing netlist for each design before running the TimeQuest analyzer. You can use this dialog box instead of the Create Timing Netlist command in the Tasks pane if you want to specify a different speed grade or a different timing model. The command also generates Advanced I/O Timing reports for supported device families if you turned on Enable Advanced I/O Timing in the TimeQuest Timing Analyzer page of the Settings dialog box.

 

ExpandInput netlist:

ExpandDelay model:

ExpandTcl command:

 

 

Rate This Page