The SDI-PCIe Bridging reference design uses the SDI Intel FPGA IP and the internal hard coded PCI Express* in Stratix® IV GX FPGAs to create a bridging function for triple-rate SDI-in to PCI Express-out, and vice versa. Omnitek’s direct memory access (DMA) controller provides efficient DMA in the serial digital interface (SDI) video stream to and from the PCI Express domain.
Figure 1 shows the block diagram of the reference design.
Figure 1. Block Diagram
View Full Size
- SDI MegaCore Function
- Altera's Video Serial Digital Interface Solutions
- Triple-Rate SDI Reference Design
Reference Designs Disclaimer
These reference design illustrations may be used within Intel Corporation devices only and remain the copyrighted property of Intel. They are being provided on an "as-is" basis and as an accommodation, and therefore all warranties, representations, or guarantees of any kind (whether express, implied, or statutory) including, without limitation, warranties of merchantability, non-infringement, or fitness for a particular purpose, are specifically disclaimed. Intel expressly does not recommend, suggest, or require that these examples be used in combination with any other product not provided by Intel.