Stratix® V GX Transceiver Signal Integrity Development Kit

Intel has discontinued the Stratix® V GX Transceiver Signal Integrity (SI) Development Kit. You can find more information about the product discontinuance in the PDN1815 notification. For current Intel® FPGA development kits, please visit the All Development Kits page.

Figure 1. Stratix V GX Transceiver SI Development Board

The Stratix® V GX Transceiver Signal Integrity (SI) Development Kit provides a platform for electrical compliance testing and interoperability analysis. The accessibility to multiple channels allows for real-world analysis as implemented in the system with transceiver channels available through SMA and popular backplane connectors. You can use this development kit to perform the following tasks:

  • Evaluate transceiver link performance from 600 Mbps to 12.5 Gbps
  • Generate and check pseudo-random binary sequence (PRBS) patterns via a simple to use GUI (does not require the Intel® Quartus® Prime software)
  • Access advanced equalization to fine tune link settings for optimal bit error ratio (BER)
  • Perform jitter analysis
  • Verify physical medium attachment (PMA) compliance to 10GbE, 10GBASE-KR, PCI Express* (PCIe*) (Gen1, Gen2, and Gen3), Serial RapidIO®, Gigabit Ethernet, 10-Gigabit Ethernet XAUI, Common Electrical I/O (CEI) 6G, CEI-11G, high-definition serial digital interface (HD-SDI), Interlaken, and other major standards
  • Use the built-in high speed backplane connectors to evaluate custom backplane performance and evaluate link BER

Table 1. Transceiver SI Development Kit, Stratix® V Edition

Intel has discontinued the Stratix® V GX Transceiver Signal Integrity (SI) Development Kit. You can find more information about the product discontinuance in the PDN1815 notification. For current Intel® FPGA development kits, please visit the All Development Kits page.
Ordering Code Price Ordering Information
DK-SI-5SGXEA7N $4,995

In North America, call 1-888-800-0631 or contact your local distributor.
This development kit has been discontinued as per PDN1815. For other recommendations, please visit our Development Kit homepage.

Buyer represents that it is a product developer, software developer or system integrator and acknowledges that this product is an evaluation kit that is not FCC authorized, is made available solely for evaluation and software development, and may not be resold.

Development Kit Contents

 

The Transceiver SI Development Kit, Stratix V GX Edition has the following features:

  • Stratix V GX development board (see Figure 1)
    • Featured device
      • 5SGXEA7N2F40C2N
    • Configuration status and set-up elements
      • JTAG
      • On-board Intel® FPGA Download Cable
      • Fast passive parallel (FPP) configuration via MAX® II device and flash memory
      • Two configuration file storage
      • Temperature measurement circuitry (die and ambient temperature)
    • Clocks
      • 50 MHz, 125 MHz, programmable oscillators (preset values: 624 MHz, 644.5 MHz, 706.25 MHz, and 875 MHz)
      • SMA connectors for supplying an external differential clock to transceiver reference clock
      • SMA connectors for supplying an external differential clock to the FPGA fabric
      • SMA connectors to output a differential clock from the FPGA's phase-locked loop (PLL) output pin
    • General user input/output
      • 10-/100-/1000-Mbps Ethernet PHY (RGMII) with RJ-45 (copper) connector
      • 16x2 character LCD
      • One 8-postion dipswitch
      • Eight user LEDs
      • Four user pushbuttons
    • Memory devices
      • 128-megabyte (MB) sync flash memory (primarily to store FPGA configurations)
    • High speed serial interfaces
      • Seven full-duplex transceiver channels routed to SMA connectors
        • Short trace routed on a micro-strip
        • Six strip-line channels with all the trace lengths are matched across channels
      • 21 full-duplex transceiver channels routed to backplane connector
        • Seven channels to Molex* Impact* connector
        • Seven channels to Amphenol*  XCedee*
        • Seven channels to footprint of Tyco Strada* Whisper* (connector is not populated)
    • Power
      • Laptop DC input
      • Voltage margining
  • Stratix V GX Transceiver SI Development Kit software content
    • Intel's Complete Design Suite (download from Download Center for FPGAs)
      • Intel Quartus Prime software includes support for Stratix V FPGAs
      • 1-year license included
      • Nios® II Embedded Design Suite
      • Intel FPGA intellectual property (IP) library includes PCIe, Triple-Speed Ethernet, Serial Digital Interface (SDI), and DDR3 SDRAM High-Performance Controller Intel FPGA IP cores
      • IP evaluation available through Intel FPGA IP Evaluation Mode
    • Board Update Portal
      • Featuring Nios II web server and remote system update
    • GUI-based Board Test System
      • Interfaces to PC via JTAG
      • User controllable PMA settings (pre-emphasis, equalization, and so on)
      • Status indication (errors, BER, and so on)
    • Complete documentation
    • User guide
    • Reference manual
    • Board schematics and layout design files

Table 2. Collateral for the Transceiver SI Development Kit, Stratix V GX Edition

Document Description Version
PDN1815 Product Discontinuance Notification 1.0
Signal Integrity Development Kit, Stratix V GX Edition User Guide (PDF) Information about setting up the Stratix V GX transceiver SI board and using the included software. 11.0.2
Transceiver Signal Integrity Development Kit, Stratix V GX Edition Reference Manual (PDF) Detailed information about board components and interfaces. 11.0.2
Kit installation (for boards with ES silicon) Full installation of all files included in the development kit, including the reference manual, user guide, quick start guide, BOM, layout, PCB, schematics, SI demonstration, Board Update Portal example file, and so on. This installation is for ES Boards only. 11.0.2
Kit installation (for boards with ES silicon) Full installation of all files included in the development kit, including the reference manual, user guide, quick start guide, BOM, layout, PCB, schematics, SI demonstration, Board Update Portal example file, and so on. This installation is for ES Boards only. 11.1.0
Kit installation (for boards with ES silicon) Full installation of all files included in the development kit, including the reference manual, user guide, quick start guide, BOM, layout, PCB, schematics, SI demonstration, Board Update Portal example file, and so on. This installation is for ES Boards only. 11.1.2
Kit installation Full installation of all files included in the development kit, including the reference manual, user guide, quick start guide, BOM, layout, PCB, schematics, SI demonstration, Board Update Portal example file, and so on. 12.0