NAND_param Address Map

Controller reads device parameters after initialization and stores in the following registers for software

Module Instance	Base Address	End Address
`i_nand_param`	`0xFFB80300`	`0xFFB803F3`

Register	Offset	Width	Access	Reset Value	Description
`manufacturer_id`	`0x0`	`32`	`RW`	`0x00000000`
`device_id`	`0x10`	`32`	`RO`	`0x00000000`
`device_param_0`	`0x20`	`32`	`RO`	`0x00000000`
`device_param_1`	`0x30`	`32`	`RO`	`0x00000000`
`device_param_2`	`0x40`	`32`	`RO`	`0x00000000`
`logical_page_data_size`	`0x50`	`32`	`RO`	`0x00000000`	Logical page data area size in bytes
`logical_page_spare_size`	`0x60`	`32`	`RO`	`0x00000000`	Logical page data area size in bytes
`revision`	`0x70`	`32`	`RO`	`0x00000105`	Controller Revision
`onfi_device_features`	`0x80`	`32`	`RO`	`0x00000000`	Features supported by the connected ONFI device
`onfi_optional_commands`	`0x90`	`32`	`RO`	`0x00000000`	Optional commands supported by the connected ONFI device
`onfi_timing_mode`	`0xA0`	`32`	`RO`	`0x00000000`	Asynchronous Timing modes supported by the connected ONFI device
`onfi_pgm_cache_timing_mode`	`0xB0`	`32`	`RO`	`0x00000000`	Asynchronous Program Cache Timing modes supported by the connected ONFI device
`onfi_device_no_of_luns`	`0xC0`	`32`	`RW`	`0x00000000`	Indicates if the device is an ONFI compliant device and the number of LUNS present in the device
`onfi_device_no_of_blocks_per_lun_l`	`0xD0`	`32`	`RO`	`0x00000000`	Lower bits of number of blocks per LUN present in the ONFI complaint device.
`onfi_device_no_of_blocks_per_lun_u`	`0xE0`	`32`	`RO`	`0x00000000`	Upper bits of number of blocks per LUN present in the ONFI complaint device.
`features`	`0xF0`	`32`	`RO`	`0x000008C2`	Shows Available hardware features or attributes