IC_DMA_TDLR

         Name: DMA Transmit Data Level Register
Size: log2(IC_TX_BUFFER_DEPTH)  bits
Address Offset: 0x8c
Read/Write Access: Read/Write
This register is only valid when the DW_apb_i2c
is configured with a set of DMA interface signals
(IC_HAS_DMA = 1). When DW_apb_i2c is not configured
for DMA operation, this register does not exist;
writing to its address has no effect; reading from
its address returns zero.
      
Module Instance Base Address Register Address
i_i2c_0_DW_apb_i2c_addr_block1 0xFFC02800 0xFFC0288C
i_i2c_1_DW_apb_i2c_addr_block1 0xFFC02900 0xFFC0298C

Size: 32

Offset: 0x8C

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

RSVD_DMA_TDLR

RO 0x0

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

RSVD_DMA_TDLR

RO 0x0

DMATDL

RW 0x0

IC_DMA_TDLR Fields

Bit Name Description Access Reset
31:6 RSVD_DMA_TDLR
Reserved bits - Read Only
RO 0x0
5:0 DMATDL
Transmit Data Level.
This bit field controls the level at which a
DMA request is made by the transmit logic. It
is equal to the watermark level; that is, the
dma_tx_req signal is generated when the number
of valid data entries in the transmit FIFO is
equal to or below this field value, and TDMAE = 1.
Reset value: 0x0
RW 0x0