intrstk

         Interrupt Pending Status without considering the interrupt masks.

Set by hardware and read by software.
Hardware can set the particular bit, even if the corresponding bit is masked by software by intrmsk register.
Sticky behavior. Once set by hardware, the bit will remain set, till cleared by software by writing to intrclr register.


      
Module Instance Base Address Register Address
i_clk_mgr_clkmgr 0xFFD10000 0xFFD1001C

Size: 32

Offset: 0x1C

Access: RO

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

Reserved

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Reserved

perlocklost

0x0

mainlocklost

0x0

perlockachieved

0x0

mainlockachieved

0x0

intrstk Fields

Bit Name Description Access Reset
3 perlocklost
Pending status for periph PLL lock lost interrupt before intr mask
RO 0x0
2 mainlocklost
Pending status for main PLL lock lost interrupt before intr mask
RO 0x0
1 perlockachieved
Pending status for periph PLL lock achieved interrupt before intr mask
RO 0x0
0 mainlockachieved
Pending status for main PLL lock achieved interrupt before intr mask
RO 0x0