bridge_rbm_m_16_66_am_sts

         When reordering is disabled on the master bridge, hazard stall occurs if the master tries to access a new slave device while response from a different slave is outstanding on the same AID. This is because the responses can arrive out of order and the bridge is not equipped to correct the order. Without re-order buffers, hazard stalls also occur if a new large command needs to be split while there are older commands outstanding, or a large command just finished sending all its split segments but all responses have not returned yet.
When reordering is enabled, stall due to hazard occurs if a new command arrives, whose NoC QoS is different from the NoC QoS of commands outstanding on that AID

Module Instance	Base Address	Register Address
`i_ccu_noc_registers`	`0xF7000000`	`0xF7003D00`

Size: 64

Offset: 0x3D00

Access: RO

Access mode: SECURE | PRIVILEGEMODE

Note: The processor must make a secure, privileged bus access to this register. You can configure processor mode settings in the control registers of the ARM Cortex-A53 MPcore processor. For more information about processor modes, please refer to the ARM Infocenter.

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
63	62	61	60	59	58	57	56	55	54	53	52	51	50	49	48
`UNSD_63_8` `RO 0x0`
47	46	45	44	43	42	41	40	39	38	37	36	35	34	33	32
`UNSD_63_8` `RO 0x0`
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`UNSD_63_8` `RO 0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`UNSD_63_8` `RO 0x0`								`AWO` `RO 0x0`	`ARO` `RO 0x0`	`AWS` `RO 0x0`	`ARS` `RO 0x0`	`WOE` `RO 0x1`	`ROE` `RO 0x1`	`WOF` `RO 0x0`	`ROF` `RO 0x0`

bridge_rbm_m_16_66_am_sts Fields

Bit	Name	Description	Access	Reset
63:8	`UNSD_63_8`		`RO`	`0x0`
7	`AWO`	1'b1: Write commands are outstanding to the slave specified in OSSLV register	`RO`	`0x0`
6	`ARO`	1'b1: Read commands are outstanding to the slave specified in OSSLV register	`RO`	`0x0`
5	`AWS`	1'b1: AW channel is stalled on hazard	`RO`	`0x0`
4	`ARS`	1'b1: AR channel is stalled on hazard	`RO`	`0x0`
3	`WOE`		`RO`	`0x1`
2	`ROE`		`RO`	`0x1`
1	`WOF`	1'b1: Maximum supported number of write commands are outstanding waiting for response and no more requests can be accepted 1'b0: Master bridge can accept more write requests	`RO`	`0x0`
0	`ROF`	1'b1: Maximum supported number of read commands are outstanding waiting for response and no more requests can be accepted 1'b0: Master bridge can accept more read requests	`RO`	`0x0`