indwr

Module Instance	Base Address	Register Address
`sdm_qspi_qspiregs`	`0xFF8D2000`	`0xFF8D2070`

Size: 32

Offset: 0x70

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`indir_wr_xfer_resv2_fld` `RO 0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`indir_wr_xfer_resv2_fld` `RO 0x0`								`indcnt` `RO 0x0`		`inddone` `RW 0x0`	`rdqueued` `RO 0x0`	`indir_wr_rsvd_fld` `RO 0x0`	`rdstat` `RO 0x0`	`cancel` `WO 0x0`	`start` `WO 0x0`

indwr Fields

Bit

Name

Description

Access

Reset

31:8

indir_wr_xfer_resv2_fld

RO

0x0

7:6

indcnt

This field contains the number of indirect operations which have been completed. This is used in conjunction with the indirect completion status field (bit 5). It is incremented by hardware when an indirect operation has completed.  Write a 1 to bit 5 of this register to decrement it.

RO

0x0

inddone

This field is set to 1 when an indirect operation has completed. Write a 1 to this field to clear it.

Value	Description
0	No Action
1	Indirect operation completed

RW

0x0

rdqueued

Two indirect write operations have been queued

Value	Description
0	No Action
1	Two Indirect write operation

RO

0x0

indir_wr_rsvd_fld

RO

0x0

rdstat

Indirect write operation in progress (status)

Value	Description
0	No Action
1	Indirect write operation

RO

0x0

cancel

 Writing a 1 to this bit will cancel all ongoing indirect write operations.

Value	Description
0	No Action
1	Cancel Indirect write operation

WO

0x0

start

 Writing a 1 to this bit will trigger an indirect write operation. The assumption is that the indirect start address and the indirect number of bytes register is setup before triggering the indirect write operation.

Value	Description
0	No Action
1	Trigger indirect write operation

WO

0x0