Device supports multiplane read command sequence
Module Instance Base Address Register Address
nandregs 0xFFB80000 0xFFB80080

Offset: 0x80

Access: RW

Important: To prevent indeterminate system behavior, reserved areas of memory must not be accessed by software or hardware. Any area of the memory map that is not explicitly defined as a register space or accessible memory is considered reserved.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16


15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0



RW 0x0

multiplane_read_enable Fields

Bit Name Description Access Reset
0 flag

Certain devices support dedicated multiplane read command sequences to read data in the same fashion as is written with multiplane program commands. This bit set should be set for the above devices. When not set, pipeline reads in multiplane mode will still happen in the order of multiplane writes, though normal read command sequences will be issued to the device. [list][*]1 - Device supports multiplane read sequence [*]0 - Device does not support multiplane read sequence[/list]

RW 0x0