Wait count value for Program operation
Module Instance Base Address Register Address
nandregs 0xFFB80000 0xFFB80030

Offset: 0x30

Access: RW

Important: To prevent indeterminate system behavior, reserved areas of memory must not be accessed by software or hardware. Any area of the memory map that is not explicitly defined as a register space or accessible memory is considered reserved.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16


15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0


RW 0x1F4

program_wait_cnt Fields

Bit Name Description Access Reset
15:0 value

Number of clock cycles after issue of program operation before NAND Flash Controller polls for status. This values is of relevance for status polling mode of operation and has been provided to minimize redundant polling after issuing a command. After a program command, the first polling will happen after this many number of cycles have elapsed and then on polling will happen every int_mon_cyccnt cycles. The default values is equal to the default value of int_mon_cyccnt. The controller internally multiplies the value programmed into this register by 16 to provide a wider range for polling.

RW 0x1F4