l3master

Controls the L3 master HPROT AHB-Lite signal. These register bits should be updated only during system initialization prior to removing the peripheral from reset. They may not be changed dynamically during peripheral operation All fields are reset by a cold or warm reset.
Module Instance Base Address Register Address
sysmgr 0xFFD08000 0xFFD08118

Offset: 0x118

Access: RW

Important: To prevent indeterminate system behavior, reserved areas of memory must not be accessed by software or hardware. Any area of the memory map that is not explicitly defined as a register space or accessible memory is considered reserved.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

Reserved
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Reserved

hprotcache_1

RW 0x0

hprotcache_0

RW 0x0

hprotbuff_1

RW 0x0

hprotbuff_0

RW 0x0

hprotpriv_1

RW 0x1

hprotpriv_0

RW 0x1

hprotdata_1

RW 0x1

hprotdata_0

RW 0x1

l3master Fields

Bit Name Description Access Reset
7 hprotcache_1

If 1, L3 master accesses for the USB modules are cacheable. The field array index corresponds to the USB index.

RW 0x0
6 hprotcache_0

If 1, L3 master accesses for the USB modules are cacheable. The field array index corresponds to the USB index.

RW 0x0
5 hprotbuff_1

If 1, L3 master accesses for the USB modules are bufferable. The field array index corresponds to the USB index.

RW 0x0
4 hprotbuff_0

If 1, L3 master accesses for the USB modules are bufferable. The field array index corresponds to the USB index.

RW 0x0
3 hprotpriv_1

If 1, L3 master accesses for the USB modules are privileged. The field array index corresponds to the USB index.

RW 0x1
2 hprotpriv_0

If 1, L3 master accesses for the USB modules are privileged. The field array index corresponds to the USB index.

RW 0x1
1 hprotdata_1

Specifies if the L3 master access is for data or opcode for the USB modules. The field array index corresponds to the USB index.

Value Description
0x0 Opcode fetch
0x1 Data access
RW 0x1
0 hprotdata_0

Specifies if the L3 master access is for data or opcode for the USB modules. The field array index corresponds to the USB index.

Value Description
0x0 Opcode fetch
0x1 Data access
RW 0x1