doepmsk

This register works with each of the Device OUT Endpoint Interrupt (DOEPINTn) registers for all endpoints to generate an interrupt per OUT endpoint. The OUT endpoint interrupt for a specific status in the DOEPINTn register can be masked by writing into the corresponding bit in this register. Status bits are masked by default
Module Instance Base Address Register Address
usb0 0xFFB00000 0xFFB00814
usb1 0xFFB40000 0xFFB40814

Offset: 0x814

Access: RW

Important: To prevent indeterminate system behavior, reserved areas of memory must not be accessed by software or hardware. Any area of the memory map that is not explicitly defined as a register space or accessible memory is considered reserved.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

Reserved

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Reserved

nyetmsk

RW 0x0

nakmsk

RW 0x0

bbleerrmsk

RW 0x0

Reserved

bnaoutintrmsk

RW 0x0

outpkterrmsk

RW 0x0

Reserved

back2backsetup

RW 0x0

Reserved

outtknepdismsk

RW 0x0

setupmsk

RW 0x0

ahberrmsk

RW 0x0

epdisbldmsk

RW 0x0

xfercomplmsk

RW 0x0

doepmsk Fields

Bit Name Description Access Reset
14 nyetmsk

Value Description
0x0 Mask NYET Interrupt
0x1 No Mask NYET Interrupt
RW 0x0
13 nakmsk

Value Description
0x0 Mask NAK Interrupt
0x1 No Mask NAK Interrupt
RW 0x0
12 bbleerrmsk

Value Description
0x0 Mask Babble Error Interrupt
0x1 No Mask Babble Error Interrupt
RW 0x0
9 bnaoutintrmsk

Value Description
0x0 Mask BNA Interrupt
0x1 No Mask BNA Interrupt
RW 0x0
8 outpkterrmsk

Value Description
0x0 Mask OUT Packet Error Interrupt
0x1 No Mask OUT Packet Error Interrupt
RW 0x0
6 back2backsetup

Applies to control OUT endpoints only.

Value Description
0x0 Mask Back-to-Back SETUP Packets Received Interrupt
0x1 No Mask Back-to-Back SETUP Packets Received Interrupt
RW 0x0
4 outtknepdismsk

Applies to control OUT endpoints only.

Value Description
0x0 Mask OUT Token Received when Endpoint Disabled Interrupt
0x1 No Mask OUT Token Received when Endpoint Disabled Interrupt
RW 0x0
3 setupmsk

Applies to control endpoints only.

Value Description
0x0 Mask SETUP Phase Done Interrupt
0x1 No Mask SETUP Phase Done Interrupt
RW 0x0
2 ahberrmsk

Value Description
0x0 Mask AHB Error Interrupt
0x1 No Mask AHB Error Interrupt
RW 0x0
1 epdisbldmsk

Value Description
0x0 Mask Endpoint Disabled Interrupt
0x1 No Mask Endpoint Disabled Interrupt
RW 0x0
0 xfercomplmsk

Value Description
0x0 Mask Transfer Completed Interrupt
0x1 No Mask Transfer Completed Interrupt
RW 0x0